Our company is the production roll forming machine.
Machine operation procedures
1. First of all, you must seriously study and description of all relevant agencies and manipulation, adjustment, maintenance instructions, then a no-load manual and motorized test.
2. Classes before driving, according to lubrication instructions lubricate the friction surfaces.
3. Machine tool table when brake tight, slippery saddle.
4. roll forming machine tool parts in the processing of the weight must not exceed the provisions of machine load, maximum load 600kg.
5. Work, check the fuel tank should not leak, work is completed, put the net working solution, wiped off the milk tank, and countertops.
6. Machine adjustment, the flow of working fluid pumps oiling, in the rough, the surface above the workpiece surface, the minimum not less than 50mm.
7. Once every three months to replace paper-off filter, clean-up once every six months to one year, the Ministry of storage tanks deep lake with low objects, once a month cleaning up the oil pump and back to mouth filter.